Summary

Printable Left and Right gantry for the Ord Bot.

Instructions

A printable L/R gantry for the Ord Bot. It has been tested on a Hadron.

This is made to couple with a square acme nut used with precision lead screws for the Z-axis (McMaster 95270A111)

The gantries should be printed at 100% infill; they are still slightly flexible so a metal rod may be used to brace it (as pictured).

This was derived from original Ord Bot specifications, all credit goes to Bart Dring: http://www.buildlog.net/wiki/doku.php?id=ord_bot:the_ord_bot