Summary

A solid model of the Copa América Trophy (America Cup Trophy)

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I added a three-pieces splited version of the trophy so it can be printed without supports. I also added the trophy sliced vertically in case you want to test a side printing.</p><p>I modified the infill %, since a 10% infill could help to enhace the inner structure, in order to print the model in one piece, due to the curves.</p></div>

How I Designed This

Starting from scratch, I drew a basic profile of the America Cup Trophy in Acad2007, taking as a base different images from the cup. I used mostly polylines, and splines. Once I had all the line connected by nodes, I took the profile, and created a part in Inventor. Then on Inventor I selected to create a sketch and just did: Ctrl+C on Acad2007, Ctrl+V on Inventor's sketch, this way I pasted the profile and kept the splines. I revolved the profile in Inventor, and ready!

Copa America Trophy - Solid Model