universal 250 class quad prop guards

this will fit most (all) frames with 1806 motors!

This is a prop guard i made for my 250 quad. i could not find a good one so i decided to make it myself. i use DYS be1806 2300kv motors. so make sure that the diameter of your motors is 23mm.
the piece wich is between the motor and the frame is 1mm thick. the prop guard itself is 3mm thick. the guard is not fixed with a screw but is clammed between the frame and the motor. so you can still turn it to your preffence.
i included the original SolidWorks file aswell so you can change anything you like. so don't feel limited in the motor size and go and adjust it yourself.

Prop Guard Specs:
Motor: DYS be1806 2300kv
frame: 250 class (hking color 250 casual fpv)
Props: 5 inch or less(6 inch will fit but it protects with just .5 centimeters)
Radius prop guard: 80mm
thickness: 3mm

Comment for any questions, always happy to help.
Feel free to make different sizes for different motor types and upload them to me. i will add them here so people will find all the different sizes on the same page. Help out the community and ofcourse your name will be mentioned with your creation!

UPDATES:
**6 inch prop, 2206 motor added.