Drum

REV1 | (Void)

REV 2 | (one piece)

No support needed
Added a shape to increase comfort when playing with the drum
Added fixture to use with a rope
Top skin is 0.8 mm
Print with the top skin laying down
Added extension that can be stacked as required. The extension should be bonded using contact glue.

REV 3 | (interchangeable)

Modify the design so that the top skin is removable. It is built with a self locking clip.
Pros: will use less plastic if the drum gets damaged.
Cons: risk of affecting the sound.

REV 4 | (3D printable on a 200 X 200 mm bed)

Same feature as above!
Thank you to provide feedback and request for special add-on

General information: