Summary

Remixed Adafruit Trinket Mount to hold the USB connector better. I use the Trinket to drive an Adafruit NeoPixel ring https://learn.adafruit.com/adafruit-neopixel-uberguide/arduino-library on my 3D printed InMoov robot. http://www.inmoov.fr.

Print Settings

Printer:

Vertex K8400

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The part has a bit of overhang, You can print it with supports if needed. I just cleaned up the space for the board with a file. </p></div>

Post-Printing

Powering the pixelring

            <div><p>The Trinket can only supply 150mA if you connect to 5V out.<br>I use USB to power the Trinket and power the pixelring from USB+.<br>That way I can use all power that the USB can supply, i.e. 1-2.1 A depending on the USB port being used.<br>You can see on the pictures how its done.</p></div>

Mount for Adafruit Trinket.