Summary

I was looking for a cupholder that I can use outside, and attach to my deck. I didn't see one here, so naturally, I designed one!

This holder can fit 12oz cans, bottles, and a "standard" pint glass (see pictures). Use #8 x 1" flathead wood screws to secure it to whatever you like. The mounting pad is sized such that the pint glass will not hit the mounting surface.

Print Settings

Printer Brand:

RepRap

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Custom-Built Printer</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Used 0.4mm nozzle</p><p>Does not need any supports, just print it, remove it, and use!  </p></div>

How I Designed This

I designed this using SolidWorks 2016. The two driving factors on this were the size of the pint glass, the diameter of a 12oz can, and the can's height, so you can easily pick up the can when inside this holder. The diamond openings are just a little design flare along with a desire to reduce the overall amount of plastic.

I also included openings to easily allow you to screw in the flathead screws. The CAD design was intended for #10 wood screws, but #8 wood screws are recessed better, so go with them! The holes are spaced 1.75" apart.
Enjoy!

Wall Mounted Cup Holder