Summary

These are three boxes with removable tops. Each can be printed separately. They are 20mm, 30mm, and 40mm boxes, so they will nest if desired.

Print Settings

Printer Brand:

Ultimaker

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p><a rel="nofollow" href="https://ultimaker.com/" target="_blank">Ultimaker 2</a></p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Fast Mode</p></div></p>

Post-Printing

The box top and bottom create a friction fit. Very small differences in the part sizes can make a big difference in how tight the fit is. Don't force the top onto the box. If it is too tight, sand or file the tabs and the inside of the top a bit and try again.

I've had good luck with a flat file. Just a little filing makes the parts smoother and lets them fit together easily.

Boxes with Tops