Summary

This is my first made thing, constructed with sketchup V8.
Printed on:
UP! Mini
Print Settings

Printer Brand:
Up!
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Up Mini</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,25mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>60%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Speed: normal<br>Material: PETG or ABS is fine<br>with 80% Infill max. 116,0gr<br>with 60% Infill max. 104,9gr<br>with 50% Infill max.  99,0gr<br>print time 5-6 hours</p><p>print Temp: 250 - 260 degree</p><p>Dimensions:<br>buttom 75mm diameter,<br>top 100mm,<br>height 110mm,<br>wall thickness 4mm</p><p>however UP! Software detects failure but the Software has a repair tool and it works fine ;)</p><p>If you like this thing please share ;)</p></div>
toothbrush cup
