LoRa Microchip_RN2483_LoRa_Mote enclosure version 2

Microchip LoRa Mote version 2
The board has other dimensions, the display has changed from Oled to lcd and the buttons have moved

Enclosure for Microchip RN2483_LoRa_Mote version 2

• Print buttons Layer High .10

• Turn Top part upside down for smooth surface and print without support

• Put 2 buttons in place and melt the top of pins down with a nail.
• Test buttons before you glue the top on the bottom

Update new top part with GPIO and ICSP entry