Summary

I wanted to design my own quad copter from scratch. So I came up with this. I wanted it to be sturdy but light. I plan on sometime this year add the RC parts to make it live!
I had to print it standing straight up and down with supports everywhere. It was tough to cutaway, but I can hold the finished product in my hand.

Print Settings

Printer:

MAKERFRONT i3PRO XL

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>

Post-Printing

How I Designed This

How Designed

            <div><p>I wanted to make my own quad copter (quad means 4 of course). I wanted it to be sturdy because I would probably break it flying so I wanted to make it stay alive.  :)</p><p>I used 123D design to make it. I ran it through MeshMixer and Cura.</p><p>It must print standing up or the print nozzle will run into the print. I think this actually made it stronger!</p></div>

X-Quad