kossel delta e3d hotend mount

update #2: uploaded a new version which should work completely. top cap is now countersunk to allow for the m3 bolts to reach the nuts at the bottom of the effector. untested as i did it by hand myself, but it should be better. also added a little bit of flair to the design. didn't add a fan mount since i just ziptied mine to the pillars with some small shims to space it out.
update: fixed a few design flaws based off my first attempt to print :)
while i was awaiting the delivery of my new hotend, i decided to take a crack at some openscad and designing a new mount for my printer.
I currently use the kossel delta effector modified to match the alternate pup style carriage (http://www.thingiverse.com/thing:78967)
iirc, this carriage has a width of 44mm so the standard kossel mini effector has been modified to reflect this. i added a jhead style mount and posts to raise the hotend above the effector, allowing for more print height. nut traps have also been deepend to allow for easier traxxis mounting.
i have yet to recieve this hotend so i was working from a model of it i found on thingiverse (http://www.thingiverse.com/thing:80904) this model WILL CHANGE as i make sure it will fit the new hotend once it arrives. feel free to derive a new one if you have the hotend, the openscad files are available for tweaking.
i also plan on adding a cooling fan (most likely a 20mm one) to blow across the fins, this model will likely be modified later to accomadate that. likewise i will most likely add a depth probe mount of some sort (though i fear the new layout will not require a different design than the original kossel probe)