Summary

Wall mount for Extech EX330 Multimeter. Attach to wall or shelf with flat head screws. Holder for leads is optional.

Print Settings

Printer:

Sindoh 3Dwox

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Layer Height 0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>

Notes

Nozzle and Extrusion width = 0.4mm
Top & Bottom Layers = 3
Multimeter Holder Wall Thickness = 2.4mm
Optional Lead Holder Wall Thickness = 1.6mm
PLA and ABS tested

Print in orientation as shown in photos. I used a raft but did NOT use any supports with slight quality challenges at the top of the knockout circles but nothing real bad.

Extech EX330 Multimeter & Lead Wall Mount