Summary

This is a CC3D flight controller case for use with angled motor pins.

Print Settings

Printer:

MTW MiniMax

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.25mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>PETG</p><ul><li>Extruder Temp: 232 C</li><li>Heated Bed Temp: 60 C</li><li>Print Speed: 30mm/s infill, less for the borders</li><li>Fan Speed: 50% for bridging (where USB port is), 0% everywhere else</li></ul></div>

Post-Printing

            <p class="detail-caption"><strong>screws and standards are not part of the model</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/24/1d/db/54/03/IMG_0940.jpg"></p>            <p class="detail-caption"><strong>screws and standards are not part of the model</strong></p>                <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/e2/f2/2c/e7/7d/IMG_0938.jpg"></p>            <p class="detail-caption"><strong>screws and standards are not part of the model</strong></p>

OpenPilot CC3D Case (Angled Pins)