Charging station

Still working on the exact measurements and strength testing. Can hold at least 2 phones and 3 tablets HORIZONTALLY. My goal/expectaion is:
ipad pro 12.9 x 1 this will just have to hang over the edge due to length/height restrictions
ipad pro 9.7 x 2 These may too
ipad mini x1
kindle fire x1
phone/ipod x 3

i'll update as i test it
Update 1: clips are too flimsy; need to resize

V2: Slimline. No cable clips. Fits Rep 2x bed.12hr build @ 0.2 and 10% infill
Note:Currently strength testing. Possible issue with layer adhesion

V3: Modular. Limited by build volume? Mix and match setup. Just print 2 clips to join them.
Average time 1-2 hours per part
Note: May build usb port box underneath. Clips only stop back and forth movement, not side to side