FPV CAM MINI POD for Hubsan or WHOOP
Made this pod to make a small FPV module that is easily transferable between my RC devices. It's 5V so I'm using a Pololu 5V Step Up for my 1C devices. Unfortunately it was a 5V model. I have a 3.3V model coming in too so it can run off 1C with no step up converter. Going to place velcro on bottom so can move from piece to piece no problem. I will be making a new version when my new transmitter comes in! Design should still work with 25mW but will probably make a better one.
Items used:
Video Transmitter: $11.59 200mW! Tons of distance
http://www.banggood.com/FPV-5_8G-200mW-32CH-Wireless-Audio-Video-AV-Transmitter-Module-FX758-2-p-980317.html?p=RS05133947954201603I
WITH THIS VTX on AC YOU NEED A STEP-UP CONVERTER!
http://www.getfpv.com/5v-step-up-voltage-regulator.html
Antenna: $3.99
http://www.banggood.com/FPV-5_8GHz-Micro-CL-TX-Anternna-0_8g-Lightweight-p-973291.html?p=RS05133947954201603I
3 position dip switch for changing channel: <$5 Just example (I used 4 as I had some and just cut off fourth leg)
http://www.ebay.com/itm/10Pcs-Slide-Type-Switch-Module-2-54mm-3-Bit-3-Position-Way-DIP-Red-Pitch-/311393685461?hash=item4880828fd5:g:chsAAOSwjVVVk7xY
Can easily be built for under $30 if you're patient.