Summary

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/l0sj5qUXDHe
Print Settings

Printer:
XYZ Davinci Jnr
                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>good</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Rectilinear</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Sorry Not sure of how to relay details so I will just add all my info here.<br>I tried to make this so you could use it as a desktop stand or alternately attach to a spare light stand so you can dock the Osmo in Field.<br>There is a 5mm hole in the smaller post.<br>I Drilled it out a bit more and tapped it to  1/4-20 so I can use a bolt to help secure it more to the stand. As is ,without the bolt, it won't fall off but will rotate around the top of the stand. May be a nuisance if trying to adjust the Osmo.<br>Also , I made mine from PLA and it is very solid and structurally sound but the 1/4-20 hole does feel like if I tightened it too much something might break.<br>I have read that ABS would be stronger but that I believe I would have to change measurements for the Osmo to fit.<br>I hope you find this usefull.</p><p>Quality :Good...<br>Material:PLA...<br>NO : Raft, Supports or Brim.<br>I doid have Auto Repair checked.<br>Nozzle Diameter: 0.4...<br>3D Density 10%...<br>Layer Height 0.3....<br>Shells: Normal...<br>Speed: Standard...<br>With these settings it took approx. 6 hours to print.</p></div>
How I Designed This

Tell us more...
Osmo_Stand_2ATP
