Summary

This is a 3-D printable shredder key for Staples brand shredders using the Staples brand key or Lockout key. It is confirmed to fit a variety of shredders.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8WikSysQQPG

Print Settings

Printer:

Prussa i3

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Unimportant, I used .08 layer height.</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Doesn't matter, but set to about 20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print settings aren't overly important, it should print solid and there is a built-in buffer so that small printing differences won't make a large difference in if the key will fit.</p></div>

How I Designed This

There were MANY, MANY versions of this to get the measurements just right. The most difficult part was making sure that the distances for the top section were correct.

Staples Shredder Key