Summary

Customizable Open_Wire_Spacer for open wire transmission line

120mm is 600 Ohm for 1.75mm conductor
40mm is 450 Ohm for 1.75mm conductor

You'll need one spacer every 30cm (1FT)

I had make the diameter for the wire 3.0mm for my 2.7mm wire on my printer. Please make a test print and test if its fitting nice and tight on your wire otherwise use the customizer to change the diameter.

Print Settings

Printer:

Flashforge Dreamer

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Material:  ABS<br>Seems that the nipple which holds the wire break very easy if you printing this in PLA. </p></div>

Customizable_Open_Wire_Spacer