Summary

Remix of "Honu Sea Turtle by Replicantnexus7" but low poly.

UPDATE
10/01/16 - Realized that one of the legs was not attached. Fixed.
10/01/16 - Added model with support (see Misc Notes)

Print Settings

Printer:

Wanhao i3 Duplicator Plus

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>This model is a bit difficult to print due to the fact that it has no flat surface. I was able to print it with minor artifacts by adding supports via Meshmixer laying it on it's butt. See the file with <strong>"honu-low-poly-support.stl"</strong>. Use a Brim of 5mm to better adhere to the bed.</p><p>If you guys get good results otherwise please leave a comment.</p></div>

Honu Sea Turtle Low Poly