SnodoRob4B

SnodoRob4B (Gold)
Pose figure.
Material : 4 x big BIC spring, 4 x small BIC spring (cut about 20mm)
If you have 4 old empty BIC lighters (classic not small) you can recycle it, to make SnodoRob4B like illustrated in photos.
For small springs i cutted and inserted a small nail, because to print a cylinder of 2,6 mm of diameter is too hard for me, but you can try to use SnodoRob4Cyl.
Insert like in photo SnodoRob4P for big spring in long-bone.
I use a little cutter to insert the spring, is not very easy, but when inserted works fine. The best way was to use other 4 big spring but 8 BIC are required ...
Control the movement of the piece SnodoRob4P, to have a ... CLICK !

10.10.2016 - Add SnodoRob4B improved ( file SnodoRob4OK2.stl )

• Redesigned hands and feet junctions to avoid to put small cutted nail or SnodoRobCyl, so now is possible put only the small cutted spring.
• Corrected head asymmetry
• Redesigned feet and hands and other details