Summary

This is a EL Wire Photo Frame. Ideal for keep the best moments with friends during Halloween.

Print Settings

Printer:

BQ Witbox

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

20%

Clear the holes

Use a rasp to clear the holes of the front part of the photo frame.

STEP 1 - The back part of photo frame

I used Openscad do design this part. This is made for a standard picture of 15x10

STEP 2 - The front part of photo frame

I search some images on internet and with inkscape i turn them into .dxf file and use it on openscad.

STEP 3 - The support for the photo frame

This is a simple support frame

STEP 1 - Materials

You will need:

STEP 2 - Install the EL Wire

Pass the EL Wire through the hole and put it around the frame

STEP 3 - Install the support

Fit the support in the back part of the photo frame

STEP 4 - Add the photo

Choose a photo

STEP 5 - Fit the front part of the photo frame

Don't forget to use the rasp if needed!

STEP 6 - Turn on the EL Wire

Turn the EL Wire on and then turn off the lights

Now your photo disappears in the void...

All about EL Wire

This a excellent pdf made by Lady Ada

Use inkscape

A little tutorial how to use inkscape to vectorize images