Race quadcopter FRSKY antenna mount

This is a little mounting plate to go on the top of a race quadcopter (or any other kind), and which has little holes for the FRSKY receiver antennas (i.e. D4R-II or X4R receivers). These holes are sized to accommodate a hopefully-standard-sized coffee stirrer straw (I think I got mine at Starbucks) with the antenna wire routed inside for protection. Designed to be mounted on the top of a quadcopter with a bit overlapping the edge so the antenna wires can be inserted from underneath. I held it down with servo tape and a zip tie.

The antenna slots are angled at 25 deg and 55 deg rearward, with one angled inside by 10 deg and one angled outward at 10 deg. These angles are a best-guess to ensure at least one is nearly vertical when in forward flight. Probably best to put a tiny dab of superglue when inserting the coffee-stirrer into the holder, to help keep it in place.

Two models available... one meant to overhang the right side of a quad, and one to overhang the left. Antennas should tilt backward when you're all done... unless you fly mostly in reverse, of course.