Summary

Hexacopter build. wood and printed parts with printrbot simple.

Instructions

Print all parts... one of each accept the motor mounts you'll need 6 of those and the landing gear, 6 of each side (leg 1 and 2)
parts designed around 15mm pine that you will need aprox 4.5m of or 3x1.5

Cut wood for arms to a length of 45 cm and place in bottom coupling. drill holes trough the wooden arms using the bottom coupling as a guide. use 3mmx20mm nut screws to affix the top coupling to the bottom.

Motor mounts x 6.
use small self-tapper screws at the narrow part of the mount to fix the mount to the arm. dril holes trough the wood using the mount as a guide. Place the motor on the mount and tighten it down by screwing a 3mmx18mm screw from the bottom of the wood, trough the "mount" and into the motor.

Hexacopter Build