Summary

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lK3idZ06PAy

Print Settings

Rafts:

Yes

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20-30</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed this on its back, mount arm facing straight up and supports were not required. Printed multiple times during final design and had no issues.</p></div>

Post-Printing

Mounting the controller screws

            <div><p>I used the factory screws in the bottom of the controller to secure it to the bracket. They are coarse threaded mini screws that I could not find longer versions of. To mitigate the extra width of the bracket as much as possible, I used multiple drill bits to take small bits of material off of the mount holes from the bottom side of the bracket to countersink the holes. This allowed the heads of the screws to rest closer to the controller.</p></div>

MK6 VW Golf Snow Performance Methanol Controller Mount