Summary

A mod to the work by Jimbob (thanks for the excellent work!) to his Inductrix frame. Added a front underslung camera mount, flattened the frame and a bit and removed motor protection to make it lighter, and widened the battery mount to fit Blade MCPX batteries. It's a bit of a special-case type build, but I figured I'd share in case someone else wants to try it.

Print Settings

Printer:

JGAurora A3

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>My final print is 100% infill on concentric setting (seemed to print well this way on my printer). Supports everywhere, crank up the % on supports for possibly better motor supports, though it printed fine on mine with between 15 and 25%. Could definitely get away with fewer shells and infill, but things are already pretty thin and the inductrix is supposed to be able to take a crash or two.</p></div>

Post-Printing

I mounted my flight controller "inside" the frame (see pics). Really tight fit, but it's possible to wedge it in there. Motors should fit tight, and if not, use a strip of packing tape on the motor.

FlatWhoop