Summary

he Mini Maze is based on the 3D-Maze V2. It is a smaller version with simpler actuators.
The path has been extended a bit.

The object is to move the "actuators" from one corner to the other.
You have to figure out that a possible movement in one dimension can be blocked in the next one.

The actuators are made from a round piece of wood 4 mm in diameter. You can find this in DIY stores. When you manage to print 4 mm rods let me know how.

Print Settings

Printer:

Da Vinci Mini w

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I did have to fight warping, so use your own experience to prevent warping of the components during printing.</p></div>

Post-Printing

The actuators are made from a round piece of wood 4 mm in diameter. You can find this in DIY stores. Cut 1 piece of 112 mm length and 4 pieces of 56 mm length. Assemble it in the „center“ object inside the box before you glue the top on.