Summary

The rotary switch on my lamp is really hard to turn. This clamps onto the switch to give me more leverage. I imagine it might be useful for someone with weak fingers or arthritis.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9gAFB1Iu1Xm

Print Settings

Printer Brand:

Printrbot

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Simple Black</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.145mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>May need to print it 1-5% larger to get it to fit the knob. It is really tight.</p></div>

Post-Printing

Installation is tricky

            <div><p>If you can't operate the lamp, you won't be able to install this properly. Sorry.</p><p>It takes some non-trivial effort to get it to go on. The last one I made I had to print 1% larger and it was still very hard to put on. I hold the 2 halves together and press it over the end of the knob.</p></div>

5mm Lamp Switch Clamp Grip