Summary

Small cablespool meant to be placed on a M10 rod. Prints in two pieces, which fits together VERY snugly. You have to use some pressure, but it fits perfectly.

Designed in SketcUp 8.

Instructions

You can easily print this with 15 or less infill. I used 10% infill in my prints, and they became sturdy and very functional. If you want it to be REALLY solid, just use 100% infill.

Print it with 0.2 layer height or less for great results.

When assembling, beware that the pieces are made with 0 in margin, so they should fit perfectly togehter, but you need to use some pressure to "pop" them together. This makes sure that the thing will never get loose. You can also add some quick glue to the pieces when assembling for permament solution.

Good luck, and organize your cables! If interested, I can make some bigger versions too.

Cable spool