Summary

Simple Rack for Dollar Store Rectangular Containers. (10 Pack)

Uses x2 Neodymium Magnets to hold it onto any metal surface.

Magnets are 6.35mm x.6.35mm x 25.42mm N42 Strength.
1/4" x 1/4" x 1"
https://www.kjmagnetics.com/proddetail.asp?prod=B44X0

Can hold about 4-5 lbs. (Approx)

Enjoy!

Print Settings

Printer:

FolgerTech Prusa i3 Aluminum 2020

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.12mm - .20mm Layers .4MM nozzle</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>60%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use a 5 line Brim, remove only the outer brim after printing. </p><p>Chill the Magnets in the Freezer to contract the metal just a bit. </p><p>Once Freezing cold, they should slot into the cut outs on the rack, or gently tap in. </p><p>Then using no glue, they will be secured in once they warm back to room temp. </p><p>The brim being left on the back, prevents the magnets from shattering when they tap hard onto the surface they adhere to. </p><p>The fitment is VERY tight. The Freezer trick was REQUIRED to get mine into the part without breaking the plastic cut outs. </p><p>Suggest putting the magnets in BEFORE the part has time to cool completely. </p></div>

Magnetic Container Rack