Summary

I fit the holder where I wanted it and drilled a 1/8" hole through the hose holder. I used a small wood screw to keep it in place.NOTE: The attachments slide up through the holder.
I used PLA at 220deg C, and the build plate at 95deg C

Print Settings

Printer Brand:

FlashForge

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Creator Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Standard</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I fit the holder where I wanted it and drilled a 1/8" hole through the hose holder. I used a small wood screw to keep it in place</p></div>

How I Designed This

I came up with the Idea after using the sweeper

Hoover Windtunnel High Performance Pet Mod