VariZoom VZROCKEX Display Add-on

This is a 3D-printable panel for a VariZoom VZROCKEX
http://www.varizoom.com/product-p/vzrockex.htm
Designed to increase communication between a camera operator and the control center.

Features:

1. 4 momentary illuminated pushbuttons (Yes, No, Trouble and Ready)
2. Button Function text engraved in surface, which can be filled with colored paint.
3. 1 digit LED display for identifying which camera position the operator is using.
4. An Arduino Nano is designed to fit in the back and interface with the buttons and control center computer
5. A hole in the back for a communication cable to exit through.
6. Assembles using 4 different panels, each secured using 2-56 screws.
7. Secured to VariZoom controller by bolts already on the bottom of the controller.
8. Buttons are disigned to be secured using epoxy.
9. Tally LED

Bill of Materials:
1x http://www.amazon.com/10Pins-Numeric-Digital-Display-Cathode/dp/B00HR72FJ8/ref=sr_1_1?ie=UTF8&qid=1389482010&sr=8-1&keywords=single+digit+LED

4x snap action push button. momentary.(e-switch 5501M12. Mouser # 612-5501M12)

1x Tally LED

12x 2-56 x 3/8'' long tapered machine screws

Bug Fix: STL files re-uploaded with correct printable configuration in version 2.0.

Note: i'll post a picture of the final result after i'm done.