Glass Shelf Clips for CDA CW897 Fridge/Freezer

This is a quick thing to replace the supports for the glass shelf in my fridge which have snapped.
I wanted the plastic to be quite rigid so I set the fill density to 30% but feel free to play around with this.
I printed the test with PLA and am quite happy with it.

Here's the Cura settings I used:

• Layer Height: 0.2
• Shell: 0.8
• Enable retraction: Yes
• Bottom/Top thickness: 0.8
• Fill Density: 30
• Print Speed: 40
• Print Temp: 210
• Bed Temp: 55
• Support: Everywhere
• Platform: None
• Filament Diameter: 1.75
• Flow: 100
• Nozzle: 0.4