Summary

A Raspberry Pi based smart connected speaker based on resin.io, nodeJS and Mopidy!

https://youtu.be/pKvJKaCDQW8

This project is fully open-source, here you can find the Github Repository

You can read about the making of the original boombeastic and see more photos here

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Mk2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.35</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>a 3-4mm brim is suggested for printers that suffer warping</p></div>

Assembly

Required parts

            <div><p>please refer to the BoM in the <a rel="nofollow" href="https://github.com/resin-io-projects/boombeastic/wiki/Stereo_BoM">Github repository</a></p></div>                <p class="detail-title"><strong>Front</strong></p>            <div><ul><li>use 4 M3 screws and nuts for each speaker</li><li>cut 2 pair of common bi-polar electric wire and solder a pair to each speaker</li><li>press-fit the LED matrix in place, it should be tight enough to hold it without glue</li><li>fit the other extremity of the pair of speaker cables to the ADAFRUIT I2S 3W STEREO SPEAKER BONNET</li><li>wire the VCC (5V), GND, SDA and SDL pins from the LED Matrix to the corresponding labeled pins on the ADAFRUIT I2S 3W STEREO SPEAKER BONNET</li></ul></div>                <p class="detail-title"><strong>Rear</strong></p>            <div><ul><li>secure the Raspberry Pi 3 Model B using 4 short wood screws (or some hot glue, really)</li><li>attach the ADAFRUIT I2S 3W STEREO SPEAKER BONNET to the Raspberry Pi</li><li>make the power cable pass through the hole and attach it to the Raspberry Pi</li><li>place 6 M3 nuts in the slots </li></ul></div>                <p class="detail-title"><strong>Attaching front and rear</strong></p>            <div><p>Just attach the 2 pieces and use 6 M3 screws (10 to 15 mm long) to secure the assembly</p></div>

Software

Installing the BoomBeastic software

            <div><p>a getting started guide is available at the <a rel="nofollow" href="https://github.com/resin-io-projects/boombeastic/wiki">GitHub repository</a></p></div>

BoomBeastic stereo