Pen mount for the Mark2 dual extrusion system.

Want to know more of this great option to add dual extrusion to the Ultimaker2?

Main project info here;
https://magnetic-tool-changer.com/

Questions? ask here;
https://ultimaker.com/en/community/48788-ultimaker-mark2-the-smart-dual-
extrusion-upgrade

I did not manage to get Cura to Z-hop on the travel on this first layer...

Use the line width to set the distance between the lines, In the sample I used 0.7

To get the printer to "print" without extruding I used a quick and dirty trick by setting the bed to 25c and the extruders to 40c. The firmware has a protection not to extrude at these low temps.