QX23 Monitor Stand Remix of Headphone Stand

Q23 Monitor Stand from Remix

This is a Monitor Stand I made from modifying http://www.thingiverse.com/thing:2050885. I converted the STL from that into a CAD file, lopped off the top, and put a modification to accept a monitor Insert.

I bought this nice monitor MONDO CHEAP on Ebay without a stand. NOT A PROBLEM for a MAKER! The monitor is a HP 2011x and the mounting plate is stamped WF H37G0020-1 A4.

WANNA MAKE ONE? Chances are, you don’t need THIS specific stand. If you think your monitor is a close fit, try chopping it off the top in a design program and print it out on its own before you print the whole thing!

Another thing you can do, is to make a mock up piece that fits your monitor good, do a fill of the pocket in mine and then perform a Boolean operation with your mock-up! I’m uploading a STEP file so that you can import it to most standard cad programs.

I did my original work in Autodesk’s FUSION 360, including STL import, export, and STEP conversion and export. The slot for the Monitor Tongue goes through to the bottom of the cavity for easier support removal. I left the "MAKERBOT" stamp from the original model in-place. I don't know if I'm allowed to remove that from a Remix, or if I was supposed to take it out to prevent the appearance of an endorsement of my work! I'm sure they'll let me know!!!!

This was sliced and coded using ReplicatorG employing 2 shells (3 total) using PLA.

FlashForge Creator Pro (Similar to Makerbot Replicator 2)Heated Bed 45 CelsiusBlue Painters Tape on bed, no further treatmentPrint Temperature 220 degrees CelsiusSUPPORTS ARE REQUIRED to facilitate the building of the Monitor Tongue Cavity!!!!!Feedrate 40 mm/sTravel Feedrate 55(If anybody has more optimum feedrates, please share!)