Summary

This is a simple yet quite fashionable mug lid to keep your beverage hot.

This design is adaptable to different sort of mugs from 7cm to 8cm diameter. I had myself several formats of mug tested.

The hole is aimed both at letting your spoon come out, and letting the handle spread out on the same axis.

PLEASE SHARE A PICTURE OF YOUR "MADE ONE", after printing, as i would really enjoy to see it printed in various materials and colors.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Clone</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>You might choose to print it a minimum amount of support, upside down, in that case, there can be an interesting rough effect in the inlet of the bean drawing, whereas the rest of will be printed smoothly.</p><p>If you prefer to hide the rough effect of the support inside the lid, then print in the same direction as it would be covering a mug. </p><p>Remember that if PLA don't like long term moisture exposition (though it works quite well and some are food safe).<br>Dont forget to read articles on food safe filament (e.g <a rel="nofollow" href="https://pinshape.com/blog/3d-printing-food-safe/">https://pinshape.com/blog/3d-printing-food-safe/</a> )</p></div>

How I Designed This

ONSHAPE FREE PUBLIC DESIGN

            <div><p>I designed this using the online ONSHAPE browser software.</p><p>YOU CAN REMIX/RESIZE YOUR OWN FROM MY MODEL FOLLOWING THIS LINK :<br><a rel="nofollow" href="https://cad.onshape.com/documents/91e3997e45e66cb34da6fd9f/w/d064987f5eebf0a4d4e5339a/e/eb61f2ec99ecbcccb4bbeaa7">https://cad.onshape.com/documents/91e3997e45e66cb34da6fd9f/w/d064987f5eebf0a4d4e5339a/e/eb61f2ec99ecbcccb4bbeaa7</a></p></div>

HotCoffee Mug Cap to keep your drink warm.