Summary

Heavy Nickel weighted Fidget Spinner that spins very well, uses 608 bearings; very well received by my friends and co-workers so I thought I would share.

Print Settings

Printer:

DaVinci

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Based to use US Nickel. Set build plate a little extra tight, this will help hold the slightly protruding nickel in well.</p></div>

Post-Printing

Pressing Nickel Notes

            <div><p>Press in bearing first as the 4 nickels will be slightly thicker than the bearing. Press the nickels in from the top in toward the first layer; try to press the last nickel in flush with the top layer, the first nickel will protrude slightly past the fist layer but will be held extra tight due to the first layers "squish." I used a socket slightly with an ID slightly larger than the diameter of the nickel on the first layer to finish the last nickels full insertion. </p></div>

Triplex Nickel Spinner