OVR_HD GoPro camera arm and tutorial

https://www.youtube.com/watch?v=Dh9bpgXKPTg

https://www.instagram.com/oiadde/
https://www.facebook.com/oiadde/
https://twitter.com/rob_oiad
https://www.thingiverse.com/oiad/designs

In this weeks tutorial, we design an overhead arm for a GoPro camera to do some overhead filming work. The parts are created in Fusion 360, 3d printed in ABS and then assembled using M5x20 bolts. This arm can be mounted to a desk or just a sheet of wood.

Thanks for watching and if you find it useful a like or subscribe would be great.

For building this you need 4 of the bracket parts, best printed in ABS. For a two piece arm setup, you also need 2 pieces BallEnd.stl. The GoPro foot and BallEnd Plate you'll only need once.

The setup as of provided uses M5x20 cylinder screws and M5 locking nuts. The tubes are 15mm carbon tubes. Aluminum would work also very nice. If you have other tubes you would like to use watch the tutorial as I provide instructions on the ball end parts. Just create a different diameter hole in Fusion360.

Cheers and Enjoy
Robert