Paracord Watch Adapter 14mm

A paracord watch adapter. It was specifically designed for this watch: https://www.target.com/p/women-s-sport-fast-wrap-digital-watch-black/-/A-50105695 which is sadly no longer in stock, but you have my permission to modify my original file to fit whatever watch you own. All the holes are the right size, just ungroup all the pieces and change the dimensions of the blocks to whatever you see fit. I'd suggest printing at 100% infill since it's quite small and needs to be quite tough, you can probably drill out the pin hole with a drill bit 2mm or smaller. This one is meant for 14mm bands but the actual width of the top part is 13mm to give it some room, I'd suggest you make it about 1mm shorter than the pin width. The paracord holes are a bit on the small side but I was able to weave the paracord through them without too much of a problem

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/eJx6IEnfMVl