PSSH MkII (FolgerTech Prusa 2020i Power Supply Switch Holder)

This is a switch holder so that you can add a power switch to a FolgerTech Prusa 2020i printer. This switch holder will also work with any other project that uses the Mean Well-type power supply enclosure. This switch holder screws to the end of the power supply with 2 M4 screws. (the holes on the other side of the switch allow you to use a long hex wrench to screw the screws in). The switch is held in the box with 2 more M4 bolts. No nuts are need, the bolts will thread into the plastic.

The power line from the switch is fed out the hole in the bottom of the box and fed to the power supply. I mounted my power supply upside down from the FolgerTech instructions to facilitate having the switch at the bottom of the printer. I used wire from the old power supply cable to make the cable from the box to the power supply.

I used this switch with it:
https://www.amazon.com/gp/product/B06XNMT3WL/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Instructions for wiring it are here:
http://www.instructables.com/id/Wire-Up-a-Fused-AC-Male-Power-Socket/

I would also add this cover to the power supply:
https://www.thingiverse.com/thing:40377

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6p1lHc54utT