Summary

A vintage looking Marshall Keychain.

Print Settings

Printer Brand:

MakerGear

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>MakerGear M2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Fine (1mm layers)</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Doesn't look like a very good print halfway through but finishes up nicely on my printer.  Total cost to make is approximately $0.61 with the keychain calculated in.  I used acrylic paint and a flat sponge to put white on the logo/borders.  </p></div>

How I Designed This

Marshall Keychain

            <div><p>1) I found a jpeg image on Google and converted it into an SVG file on an online converter.<br>2) I extruded the 2D image (the SVG file) in 123D design.<br>3) Once the object was extruded, I created a square border to place the extruded image on.<br>4) After the two pieces were created (the Marshall Logo and the square border) I imported both to Meshmixer and connected the two and made adjustments to the object.<br>5) After the keychain looked presentable, I then opened the .stl file in 123D Design and printed it.  (Keep in mind this whole process took some trial and error)</p></div>