Ghostbusters Proton Pack Loom Clamp

Printable loom clamp for your Proton Pack. Requires the cutting of a U-Shape into one of your cyclotron slats and two drill holes in your motherboard. Only for use with 3/4" ID Split or Splitless loom. Like any clamp design, split may not work as well. I don't have any to test as my pack uses splitless.

The included PDF is a printable drilling and cutting template. Line it all up where you want it, tape the template down, and centerpunch your motherboard where you want the loom clamp. Use the other template to mark your cyclotron for cutting (dremel, etc).

The clamp closes up with M4x20mm socket head cap screws. The clamp mounts to the motherboard with two M6 screws up to 5mm thicker than your motherboard.

If you want 4 screws worth of mounting, use M4x15mm screws on the clamp, and mark/drill those holes from the template on your motherboard. Use M4x8mm screws from the back to further secure the clamp. Shouldn't be needed, though.