Frame/Stand for Raspberry pi zero + FlashAir + CameraModule

This item was designed to support various small development and experiments with RPi0+Cameramodule and FlashAir.
and designed based on thing:803447 and thing:1177271

・Supplemental Japanese documents are available
http://n-2750.cocolog-nifty.com/n602/2017/09/framestand-for.html

-AutoDesk 123D files;
zerodev057_c15.123dx
Stnd-Unt_atd012.123dx

-STL files;
zerodev057_bs.stl
zerodev057_cv.stl
zerodev057_cambdy.stl
zerodev057_cambdy5.stl
zerodev057_camcvr.stl
zerodev057_c15-clp1.stl
zerodev057c15-clp2.stl

su012-arm-L.stl
su012-arm-R.stl
su012-dmybtry.stl
su012-leg-L.stl
su012-leg-R.stl
su012-stndbs.stl

[Requirement]
-Raspberry Pi Zero
V1.3 or W is recommended.
-Raspberry Pi Camera Module (if you have RPi0 V1.3 or W)
Camera module V1 or V2 and cable for Pi Zero

-FlashAir
https://flashair-developers.com/en/

-MicroSD <--> SD converter
HENKAN-NEIJIN "SDB-TFA"
http://www.henj.in/memory.html
or
Akizukidenshi AE-SD (K-10967)
http://akizukidenshi.com/catalog/g/gK-10967/
and
some pin headers/connectors
[ex.:
　http://akizukidenshi.com/catalog/g/gC-05779/
　http://akizukidenshi.com/catalog/g/gC-00167/
　http://akizukidenshi.com/catalog/g/gC-01627/
　http://akizukidenshi.com/catalog/g/gC-02762/
etc.
]...It is necessary to solder several wires on the back side of RPi0.
And it is also necessary to solder several pin-headers/connectors on the AE-SD.

The SD signals (PP14-19 etc.) are exposed on the back side of RPi0 V1.3.
I referred https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=175504 to get important informations about PP14-19 etc.
I am grateful to the authors of that thread.

[Optional items]
-M2.6 10mm Bolt&Nut X 5 pairs.
-M2.6 8mm Bolt&Nut X 1 pair.
When the stand unit becomes loose and it becomes difficult to keep the tilt angle, please tighten it with bolts and nuts.

-Cylindrical shaped mobile battery case(Dia.=22mm)
ex: http://www.aitendo.com/product/12459
and
Li-Po battery 18650

-adafruit cobbler for RPi0
"Assembled Pi T-Cobbler Plus - GPIO Breakout - Pi A+, B+, Pi 2, Pi 3, Zero"
https://www.adafruit.com/product/2028

[ 10/3/2017 ] - One item, "BOX_269-st26" and 5 pictures were added.

-"BOX_269-st26";
Raspberry Pi 2B/3B mount-plate.
[notice]; "Raspberry Pi B+/2B/3B simple case 2" (thing: 2347622) is required.
--> https://www.thingiverse.com/thing:2347622

Please refer to "BOX_269-st26.123dx" and pics.

STL file; BOX_269-st26-bs1.stl , BOX_269-st26-bs2.stl
AutoDESK 123D file; BOX_269-st26.123dx