Summary

This is a modified version of Mark Qvale's HS1177 FPV camera mount for his static mount deck & full canopy, designed specifically for the Mini Talon UAV model aircraft.

See http://www.itsqv.com/QVM/index.php?title=Mini_Talon_Parts_Compilation#Static_Camera_Mounts

Print Settings

Resolution:

0.2

                                            <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50 - 100%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print orientation should be fairly obvious, with the largest flat side on the bed. No supports required. Slow to moderate print speed. Print in ABS for max strength though decent PLA would be fine, it's not a high-stress component.</p></div>

How I Designed This

Remixed from Mark Qvale's HS1177 FPV camera mount using MS 3D Builder.

Eagle2 mount on left, HS1177 mount on right (original Mark Qvale design).

Runcam Eagle2 mount for itsqv static camera platform - Mini Talon