Summary

I split this model in two using TinkerCAD to make it easier to print on my Monoprice Select Mini.

Print Settings

Printer:

Monoprice Select Mini

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>1.8</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I set the resolution at 1.8 and the infill at 10 to cut down on the print time. It took about 5 hours per half to print this car. </p></div>

Post-Printing

After Printing

            <div><p>The support was slightly difficult to remove from the inside of the body. The gap distance may need to be adjusted. Also the mirrors immediately broke off after printing. I just used some super glue to re-attach them. I used super glue to assemble the two halves of the car as well. Aside form the assembly I just had to cut off some loose strings and the build support. I used a knife to scrap the support attach points in the wheel wells to clear the wheels. </p></div>

How I Designed This

Design

            <div><p>I created two TInkerCAD files and removed half of the car in each.</p></div>

Two Part Pinewood Derby Mustang