Summary

The wife wanted some extra cupboard space so... REPRAP TO THE RESCUE!!

Instructions

I have included two STL files. The small was designed for spice containers around 39.2mm, and the large for the taller 44.8mm diameter containers (see picture for brand examples). Also I have included the blender files to allow adjustments or modifications.

UPDATE:7/15/2012 - Added a second version of the large holder. The second version has a taller back. I found that this help if you have heavy spice containers.

The goal of this was to use very little plastic. The walls are 1mm thick and the base is .6mm thick. I printed this with a .5mm nozzle, PLA, and cold bed with blue tape. NOTE: the print is thin, so take care removing it from the plate.

I used a 3M double sided tape to attach the holder to the door.

Enjoy

Spice Rack