Maker bot Dual Filament holder replacement (fits in original spacing)

have you got one of those ctc maker bot dual printers did your filament holder come just a little bit to big for the usual reprap style filaments here is a replacement one that should work and fit in the same hole as the last one so no need for anything else (drills etc) am printing it as we speak will let you no how i go :) will also be adding a sleave for the filament to sit on

dont forget to lookup http://www.thingiverse.com/thing:272472
also check out http://www.thingiverse.com/thing:274873

V2 IS HERE PLEASE DELETE OLD FILES

AVG cost for everything (but bolt ) is 78c aud (10% infill)
smaller bolt 1.70 @100% infill
laarger bolt 1.80 @100% infill

the .x3g file is setup for PLA not ABS

if you wish to use the gcode for pla please change line 28 and 29 to match your preferred temps (generated with slicer 9.10b and my usual settings available at http://www.thingiverse.com/thing:274873

thelines you need to change are
M109 S110 T0 (set HBP temperature)
M104 S225 T0 (set extruder temperature) (temp updated by printOMatic)