Summary

This ubitx enclosure is 8.5" W, 8" L, 3" H. I made the walls 4mm thick and you can attach the circuit board using rails and screws for the pads. Takes a long time to print. This large enclosure is designed with only the led cutout so you can modify your ubitx. 73! KE0KHA

Print Settings

Printer Brand:

Robo 3D

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>R1 ABS + PLA Model</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print Settings: single perimeter, 40% infill, 4 bottom layers, 4 or 5 top layers. .2mm layer with .35mm first layer. Speed 50mm/s. No support.</p></div>

uBITX Ruggedized Large Enclosure KE0KHA