A shielded case for the Red Pitaya

A case for the Red Pitaya

A shielded case for the scope/function generator instrument from
http://redpitaya.com/. The bare RedPitaya is just the board and without any shielding or protective housing - this project attempts to remedy that.

All connectors are accessible from the outside, and the LEDs can be seen through a slot in the case. Also, there are some decorative arrows for 'inputs' and 'outputs' on the case.

The heatsink is poking out of the case, so should be fine in normal conditions, but you might want to add a fan if you are concerned.

Find latest updates here, or send pull requests:
https://github.com/hzeller/RedPitaya-Case