Spool Base for PLA Dry Storage Bin

I made this because I wanted a dry box where the filament came through the base, not the container. This lets me leave my containers unmarred, lets me run the filament with the box off if I want, and makes changing filament spools much easier.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lmb9MKh53Gg

Designed to be used with Rubbermaid 16-Cup Modular Dry Food Storage Zylar Container
https://www.amazon.com/gp/product/B00BEUDWI2
(Note, this is not a tight fit but it apparently doesn't need to be. Without desiccant it held it's humidity has my house went +/- 10% humidity all day.)

Desiccant well filled with https://www.amazon.com/gp/product/B01M0LL9WS
(With this desiccant my enclosure sits at 10% humidity)

Currently the hole for the 5mm Male Thread 4mm Push In Joint Pneumatic Connector Quick Fittings is a tad loose, I should shrink it maybe 0.2mm, will test and repost.
https://www.amazon.com/gp/product/B01M2DKJTU

Here's the PTFE Tubing I use
https://www.amazon.com/gp/product/B01CUPV90M